EX35 RWD V6-3.5L (VQ35HR) (2008)
Collision Avoidance Sensor: Service and Repair
Rear
SONAR SENSOR
REAR
REAR : Exploded View
SN-44 Exploded View
REAR : Removal and Installation
REMOVAL
1. Remove sonar sensor connector.
2. Push the sonar sensor (1) outside (direction of white arrow) the rear bumper (2), pressing the metal clips on the back to the direction of black
arrows.
INSTALLATION
Install the bumper when the pawl engages.
CAUTION: The connector direction is within ±10°from the horizontal position when assembling the bumper.