FX35 AWD V6-3.5L (VQ35HR) (2009)
10. Remove drive pinion lock nut using the flange wrench.
11. Remove companion flange using pullers.
12. Remove front oil seal using the puller (A) [SST: KV381054S0 (J-34286)].
INSTALLATION
1. Apply multi-purpose grease to front oil seal lips.
2. Install front oil seal using the drift (A) [SST: ST30720000 (J-25405)] as shown in figure.
CAUTION:
-
Never reuse oil seal.
-
Never incline oil seal when installing.
3. Align the matching mark (B) of drive pinion with the matching mark (A) of companion flange (1), and then install the companion flange.