FX35 AWD V6-3.5L (VQ35HR) (2009)
Front Door Window Glass: Service and Repair
Removal and Installation
FRONT DOOR GLASS
Removal and Installation
REMOVAL
1. Remove front door finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Removal and Installation.
2. Remove front door sash inner cover.
3. Remove front door inside seal.
4. Remove the front door grip bracket. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Exploded View.
5. Remove both seals (A) as shown in the figure.
6. Reconnect the power window main switch and then operate the power window main switch to raise or lower the door window until the glass
mounting bolts can be seen.
7. Remove the front door glass mounting bolts.
8. Hold securely the front door glass and pull it out of the sash to remove the door glass.
INSTALLATION
Install in the reverse order of removal.