FX35 AWD V6-3.5L (VQ35HR) (2009)
Windshield Washer Pump: Service and Repair
Removal and Installation
WASHER PUMP
Removal and Installation
REMOVAL
1. Remove the fender protector RH (front). Refer to See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Fender
Protector/Exploded View.
2. Disconnect the washer pump connector.
3. Disconnect the front washer tube and rear washer tube.
4. Remove the washer pump from the washer tank.
5. Remove the packing from the washer tank.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the washer pump.