FX35 RWD V6-3.5L (VQ35DE) (2003)
46.
Install the Lumbar Support Switch Harness to the LH side of the Seat Adjust Assembly (see Figure 37). Snap it in place.
47.
Install the Catcher Bracket (both sides).
Tighten the 4 Nuts to the following specified torque: 39 - 49 Nm (3.97 - 4.99 kg.m, 28.8 - 36 ft-lb).
48.
Install Pipe Assembly.
Tighten the 4 Bolts to the following specified torque: 17.6 - 26.5 Nm (1.79 - 2.7 kg.m, 12.98 - 19.5 ft-lb).
49.
Install the Seat Adjust Assembly Cover to the LH side of the Seat Adjust Assembly (two clips). See Figure 38.