FX35 RWD V6-3.5L (VQ35DE) (2003)
Bolts mounting low-pressure pipe 1 bracket and low-pressure flexible hose bracket
Tightening torque : 5.5 Nm (0.56 kg-m, 49 in-lb)
Removal and Installation of Liquid Tank
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove front grille. Refer to "FRONT GRILLE".
3. Clean liquid tank and its surrounding area, and remove dirt and rust from tank.
CAUTION: Be sure to clean carefully.
4. Remove mounting bolts for liquid tank and power steering oil cooler.
5. Lift liquid tank upwards. Remove bracket from protruding part of condenser.
6. Slide liquid tank upward, then remove liquid tank.
INSTALLATION
Install liquid tank, and then install liquid tank bracket on condenser.