FX35 RWD V6-3.5L (VQ35DE) (2003)
2. Firmly secure air bag module bracket [SST KV99105300 (J41246)] with air bag module attached in a vise.
3. Using wire secure air bag module to air bag module bracket [SST KV99105300 (J41246)] at two places.
CAUTION: Use wire of at least 1 mm (0.04 in) diameter.
4. Connect deployment tool adapter [SST J38381-80] to air bag module connector and deployment tool connector [SST KV9910400 (J38381)].
5. Connect red clip of deployment tool to battery positive terminal and black clip to negative terminal.
6. The lamp on the right side of the tool, marked deployment tool power", should glow green, not red.
7. Press the button on the deployment tool.The left side lamp on the tool, marked air bag connector voltage", will illuminate and the air bag module
will deploy.
CAUTION: When deploying the driver air bag module, stand at least 5 m (16 ft) away from the air bag module.
Deployment of Front Passenger Air Bag Module (Outside of vehicle)
1. Firmly secure air bag module bracket [SST KV99105300 (J41246)] in a vise.