FX35 RWD V6-3.5L (VQ35DE) (2003)
36.
Install the Cross Bracket onto the Steering Column Assembly.
^
Use a pair of pliers to snap the bracket in place.
37.
Re-install the Steering Column Assembly in the reverse order of removal.
^
Refer to PS-12 "Removal and Installation" (in the ESM) for tightening torques.
^
Do not re-use any non-reusable parts.
38.
Check wheel alignment. Refer to FSU-6 "Wheel Alignment Inspection" in the ESM.
39.
After adjusting the wheel alignment adjust the neutral position of the Steering Angle Sensor. Refer to BRC-6 "Adjustment of Steering Angle
Sensor Neutral Position" in the ESM.
40.
Re-connect the negative battery cable.
41.
Check the function/operating range of the tilt and telescoping motors.
^
The range of operation is shown in Figure 18.
42.
Check the steering wheel operation.
^
Make sure the steering wheel turns smoothly all the way to the left and all the way to the right.
43.
Reprogram all radio station presets.