FX35 RWD V6-3.5L (VQ35HR) (2010)
Parking Assist Control Module: Service and Repair
Around View Monitor Control Unit
Navigation (Single Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Exploded View
1. Around view monitor control unit
Navigation (Twin Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Exploded View
1. Around view monitor control unit
Navigation (Single Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove front seat (LH side). See: Body and Frame/Seats/Service and Repair/Front Seat/Exploded View.
2. Remove floor carpet. Keep a service area.
3. Remove around view monitor control unit mounting screws.
4. Disconnect connector and remove around view monitor control unit.
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Work Procedure/Navigation (Single Monitor).
3. Perform predictive course line center position adjustment. See: Testing and Inspection/Programming and Relearning/Predictive Course Line
Center Position Adjustment/Work Procedure/Navigation (Single Monitor).
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera,