FX35 RWD V6-3.5L (VQ35HR) (2010)
Pedal Positioning System: Testing and Inspection
Special Repair Requirement
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ACCELERATOR PEDAL ASSEMBLY) : Special Repair Requirement
1.ACCELERATOR PEDAL RELEASED POSITION LEARNING
Perform accelerator pedal released position learning. See: Powertrain Management/Fuel Delivery and Air Induction/Testing and
Inspection/Programming and Relearning/Accelerator Pedal Released Position Learning/Description See: Powertrain Management/Fuel Delivery and
Air Induction/Testing and Inspection/Programming and Relearning/Accelerator Pedal Released Position Learning/Special Repair Requirement See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/Throttle Valve Closed Position
Learning/Description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/Throttle
Valve Closed Position Learning/Special Repair Requirement See: Powertrain Management/Fuel Delivery and Air Induction/Testing and
Inspection/Programming and Relearning/Idle Air Volume Learning/Description See: Powertrain Management/Fuel Delivery and Air Induction/Testing
and Inspection/Programming and Relearning/Idle Air Volume Learning/Special Repair Requirement, "ACCELERATOR PEDAL RELEASED
See: Powertrain Management/Fuel Delivery and Air Induction/Testing and Inspection/Programming and Relearning/Accelerator Pedal Released
Position Learning/Description (VK50VE).
- GO TO 2.
2.DCA SYSTEM ACTION TEST
1. Perform the DCA system action test. See: Cruise Control/Testing and Inspection/Initial Inspection and Diagnostic Overview/Action Test/DCA.
2. Check that the DCA system operates normally.
- INSPECTION END