FX35 RWD V6-3.5L (VQ35HR) (2010)
AV CONTROL UNIT
Removal and Installation
CAUTION:
Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, See:
Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Description/Navigation (Single
Monitor) See: Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Work
Procedure/Navigation (Single Monitor) See: Testing and Inspection/Programming and Relearning/Configuration (AV Control
Unit)/Description/Navigation (Single Monitor), "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Description".
REMOVAL
1. Remove front display unit. See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and Repair/Exploded
View/Navigation (Single Monitor).
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
-
Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit.
Navigation (Twin Monitor)
AV CONTROL UNIT
Removal and Installation
CAUTION:
Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, See:
Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Description/Navigation (Twin
Monitor) See: Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Work
Procedure/Navigation (Twin Monitor) See: Testing and Inspection/Programming and Relearning/Configuration (AV Control
Unit)/Description/Navigation (Twin Monitor), "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Description".
REMOVAL
1. Remove front display unit. See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and Repair/Exploded
View/Navigation (Twin Monitor).
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
-
Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit.