infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

System Diagram|Page 5885 > < System Diagram|Page 5883
Page 9
background image

FRONT VIEW
-

The front view image is from the front camera.

-

When the selector lever is in any position other than the reverse position, the front view is displayed by pressing the "CAMERA" switch. It
improves the visibility of obstacles in front of the vehicle and helps driving by the images displayed from Birds-Eye view and Front-Side view.

-

Display the vehicle width guiding line and vehicle distance guiding line in front view and display the predictive course line according to the
steering angle.

-

If the steering angle is within approximately 90 degrees, the predictive course lines on the left/right side are displayed. If the steering angle is
exceeding approximately 90 degrees, only the predictive course line on the outside (in the opposite side of steering direction) is displayed.

-

AV control unit is connected to the steering angle sensor and receives the steering angle signal via CAN communication. AV control unit is
transmits steering angle signal to around view monitor control unit via AV communication.

-

Around view monitor control unit controls the direction and distance of the predictive course line according to the sensor signal from steering
angle sensor.

Front view guiding lines

System Diagram|Page 5885 > < System Diagram|Page 5883