infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

System Diagram|Page 5894 > < System Diagram|Page 5892
Page 18
background image

Screen Rear Display
-

Switching of display is performed with serial communication between rear display unit and video distributor.

-

The rear display unit receives the DVD/AUX/USB (video data) image signal and RGB image signal from the video distributor.

Screen Front Display
-

Switching of display is performed with serial communication between front display unit and AV control unit.

-

The front display unit receives the DVD/AUX/USB (video data) image signal from the AV control unit.

-

The front display unit receives the RGB image signal from the AV control unit.

HANDS-FREE PHONE FUNCTION
-

AV control unit includes hands-free phone function.

-

Hands-free communication can be operated by connecting using Bluetooth(tm) communication with cellular phone.

-

Operation is performed by steering switch, and operating condition is indicated on display.

-

Guide sound that is heard during operation is input from AV control unit to BOSE amp., and is output from front speaker and center speaker.

When A Call Is Originated
Spoken voice sound output from the microphone (microphone signal) is input to AV control unit. AV control unit outputs to cellular phone with
Bluetooth(tm) communication as a TEL voice signal. Voice sound is then heard at the other party.

When Receiving A Call
Voice sound is input to own cellular phone from the other party. TEL voice signal is output to door speaker, and the signal is input to BOSE amp. via
AV control unit by establishing Bluetooth(tm) communication from cellular phone.

AUXILIARY INPUT FUNCTION
-

Image and sound can be output from an external device by connecting a device with auxiliary input jacks.

-

AUX image signals are transmitted to the front display unit and video distributor via the AV control unit, and

AUX sound signals are transmitted to BOSE amp via AV control unit.

USB CONNECTION FUNCTION
-

Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files, video data, and image viewer
data.

-

Sound signals of music files stored in iPod® or USB memory are transmitted from the USB connector to the

AV control unit. The AV control unit transmits the sound signals to the woofer and each speaker via BOSE amp.
-

Video signals and image viewer file signals are transmitted from the USB connector to the AV control unit.

The data and files are displayed on the front display unit screen.
-

iPod® is recharged when connected to USB connector.

-

Only files that meet the following conditions will be played.

NOTE:
-

iPod® is a trademark of Apple inc., registered in the U.S. and other countries.

-

Image signals cannot be received from iPod®.

-

Use the enclosed USB harness when connecting iPod® to USB connector.

VOICE RECOGNITION FUNCTION
-

Each operation of multi AV system can be performed by inputting sound to microphone.

-

Start of sound recognition system can be performed by steering switch.

TOUCH PANEL SYSTEM
Each operation of multi AV system can be performed by directly touching a front display.

AROUND VIEW MONITOR FUNCTION
-

This system is equipped with wide-angle high-resolution cameras on the front and rear of the vehicle and on both right and left door mirrors. The
images from front view, rear view, front-side view (RH side), and birds-eye view that shows the view from the top of the vehicle are displayed to
monitor the vehicle surroundings.

-

Around view monitor control unit cuts out and expands the image received from each camera to create each view.

-

The sonar indicator is displayed on display (superimposed on the camera image) in combination with the camera assistance sonar system to warm
of the approach of an obstacle.

-

In front view and rear view, the vehicle width, distance lines and predictive course lines are superimposed and displayed. In front-side view, the

System Diagram|Page 5894 > < System Diagram|Page 5892