FX35 RWD V6-3.5L (VQ35HR) (2010)
Front Bumper: Service and Repair
Removal and Installation
FRONT BUMPER
Removal and Installation
REMOVAL
CAUTION:
Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with oil.
1. Fully open hood assembly.
2. Remove front bumper fascia assembly upper side fixing clips
(A).
3. Remove engine room covers (LH/RH) (For VK engine models). See: Access Cover/Service and Repair/Exploded View.
4. Remove hood seal assemblies (LH/RH) (1) fixing clips (A), and then remove hood seal assembly located on the front area. See: Fender/Front
Fender/Service and Repair/Removal and Installation.
5. Remove bolts (A) of fixing bumper side stiffener (1) and front fender (LH/RH).
White arrow : Vehicle front