FX35 RWD V6-3.5L (VQ35HR) (2010)
Front Door Exterior Handle: Service and Repair
Removal and Installation
FRONT DOOR LOCK
OUTSIDE HANDLE : Removal and Installation
REMOVAL
1. Remove front door finisher. See: Front Door Panel/Service and Repair/Removal and Installation.
2. Remove front door glass. See: Front Door Window Glass/Service and Repair/Removal and Installation.
3. Remove front door module assembly. See: Front Door Window Regulator/Service and Repair/Removal and Installation.
4. Disconnect door antenna and door request switch connector, and then remove harness clamp (models with Intelligent Key system) on outside
handle bracket.
5. Remove door side grommet, and loosen TORX bolt from grommet hole.
Black arrow : TORX bolt
6. Reach in to separate key rod (2) connection [on the door key cylinder assembly (1)] (driver side).
7. While pulling outside handle, remove door key cylinder assembly (driver side) or outside handle escutcheon (passenger side).