FX35 RWD V6-3.5L (VQ35HR) (2010)
Fuel Door: Testing and Inspection
Diagnosis Procedure
FUEL LID LOCK ACTUATOR
Description
Locks/unlocks the fuel filler lid with the signal from BCM.
FUEL LID LOCK ACTUATOR
Diagnosis Procedure
1.CHECK FUEL LID LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect fuel lid lock actuator connector.
3. Check voltage between fuel lid lock actuator harness connector and ground.
Is the inspection result normal?
YES - Replace fuel lid lock actuator. See: Service and Repair/Removal and Installation.
NO - GO TO 2.
2.CHECK FUEL LID LOCK ACTUATOR CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and fuel lid lock actuator harness connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES - Replace BCM. See: Body Control Systems/Body Control Module/Service and Repair/Removal and Installation.
NO - Repair or replace harness.