FX35 RWD V6-3.5L (VQ35HR) (2010)
Headliner: Service and Repair
Removal and Installation
HEADLINING
Removal and Installation
REMOVAL
1. Remove the rear seat cushion. See: Seats/Service and Repair/Rear Seat/Removal and Installation.
2. Remove the rear seatback. See: Seats/Service and Repair/Rear Seat/Removal and Installation.
3. Remove front seat belt anchor bolt (LH/RH). See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Front Seat
Belt/Exploded View.
4. Remove rear seat belt anchor bolt (LH/RH). See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Rear Seat
Belt/Exploded View.
5. Remove front pillar garnish (LH/RH), front kicking plate inner (LH/RH), center pillar lower garnish (LH/RH), center pillar upper garnish
(LH/RH), front body side welt (LH/RH), rear body side welt (LH/RH), rear kicking plate inner (LH/RH). See: Trim Panel/Service and
Repair/Removal and Installation.
6. Remove luggage side lower finisher (LH/RH), luggage side upper finisher (LH/RH). See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Interior Trim Panel/Service and Repair/Luggage Floor Trim/Removal and Installation.
7. Remove the sun-visor (LH).
-
Remove sun-visor cap.
-
Remove mounting screws.
-
Disconnect vanity mirror lamp harness connector (with vanity mirror lamp)
8. With a remover tool, disengage the driver side front roof finisher
(1) fixing pawls and metal clips, disconnect the harness connector (A) and then remove the front roof finisher.
Triangle : Pawl
Square : Metal clip
White arrow : Vehicle front
9. Remove the lane camera cover mounting pawls with a remover tool (A), then remove the lane camera cover (1).
Triangle : Pawl
10. Disconnect inside mirror harness connectors.
11. Remove the sun-visor (RH).
-
Remove sun-visor cap.
-
Remove mounting screws.
-
Disconnect vanity mirror lamp harness connector (with vanity mirror lamp)