FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Trunk / Liftgate Control Module: Service and Repair
Removal and Installation
BACK DOOR CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the back door finisher inner. See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Back
Door Finisher/Removal and Installation.
2. Remove the back door control unit mounting bolts (A), and then remove back door control unit (1).
INSTALLATION
Install in the reverse order of removal.