FX35 RWD V6-3.5L (VQ35HR) (2010)
e. Place suitable puller tab on holes of crankshaft pulley, and pull crankshaft pulley through.
CAUTION:
Never put suitable puller tab on crankshaft pulley periphery, as this will damage internal damper.
26. Remove oil pan (lower). See: Engine Lubrication/Oil Pan/Service and Repair/Oil Pan (Lower) and Oil Strainer/Exploded View.
27. Loosen two mounting bolts in front of oil pan (upper) with power tool in reverse order as shown in the figure.
White arrow : Engine front
28. Remove front timing chain case as per the following:
a. Loosen mounting bolts in reverse order as shown in the figure.
b. Insert a suitable tool (A) into the notch at the top of front timing chain case as shown.
c. Pry off case by moving the suitable tool as shown.
-
Use the seal cutter [SST: KV10111100 (J-37228)] to cut liquid gasket for removal.
CAUTION:
-
Never use a screwdriver or something similar.