FX35 RWD V6-3.5L (VQ35HR) (2010)
2. Remove mounting screw (A), and then remove heater duct (1).
INSTALLATION
Installation is basically the reverse order of removal.
Foot Duct
DUCT AND GRILLE
FOOT DUCT : Removal and Installation
REMOVAL
1. Set the temperature at 18.0°C (60°F).
2. Disconnect the battery cable from the negative terminal.
3. Remove heater & cooling unit assembly. See: Heater Core/Service and Repair/Exploded View (VQ35HR) or See: Heater Core/Service and
Repair/Exploded View (VK50VE).
4. Remove mounting screws (A), and then remove heater pipe cover (1).
5. Remove mounting screws (B), and then remove foot duct (left)
(2).
6. Remove air mix door motor (passenger side). See: Air Door/Air Door Actuator / Motor/Service and Repair/Exploded View.
7. Remove mode door motor and links. See: Air Door/Air Door Actuator / Motor/Service and Repair/Exploded View.
8. Remove mounting screws (A), and then remove evaporator cover (1).
9. Remove mounting screws (B), and then remove foot duct (right)
(2).
INSTALLATION
Installation is basically the reverse order of removal.
Rear Floor Duct 1
DUCT AND GRILLE