FX35 RWD V6-3.5L (VQ35HR) (2010)
/Page-1363001.png)
Blower Motor: Service and Repair
Blower Motor
BLOWER UNIT
BLOWER MOTOR : Removal and Installation
REMOVAL
1. Remove instrument lower cover RH. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded
View.
2. Disconnect blower motor connector.
3. Remove mounting screws (A), and then remove blower motor
(1).
INSTALLATION
Installation is basically the reverse order of removal.