FX35 RWD V6-3.5L (VQ35HR) (2010)
Tire Pressure Module: Service and Repair
Removal and Installation
TPMS CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the glove box assembly. See: Dashboard / Instrument Panel/Service and Repair/Exploded View.
2. Remove the instrument lower panel RH. See: Dashboard / Instrument Panel/Service and Repair/Exploded View.
3. Disconnect low tire pressure warning control unit connector.
4. Remove the low tire pressure warning control unit control unit.
INSTALLATION
Install in the reverse order of removal.
-
Perform ID registration after replacing low tire pressure warning control unit. See: Testing and Inspection/Programming and Relearning/ID
Registration Procedure/Transmitter ID Registration Procedure.