FX35 RWD V6-3.5L (VQ35HR) (2010)
-
Install fuel tube (1). To connect quick connector, refer to "Quick
Connector".
2 : Retainer
Main and Sub Fuel Level Sensor Unit
-
Face main and sub fuel level sensor units as shown in the figure, and install them with the knock pin (C) on back aligned with pin hole on fuel
tank.
A : Right side
B : Left side
White arrow : Vehicle front
-
Install retainer so that its notch becomes parallel with the notch on fuel tank.
A : Align notches
White arrow : Vehicle front
-
Tighten retainer mounting bolts evenly.
Quick Connector
-
Connect quick connector as follows:
1. Check the connection for damage or any foreign materials.
2. Align the connector with the tube, then insert the connector straight into the tube until a click sound is heard.
3. After connecting, check that the connection is secure by following method.