FX35 RWD V6-3.5L (VQ35HR) (2010)
7. Disconnect harness connector (3) and fuel feed tube (2).
1 : Quick connector
White arrow : Vehicle front
Disconnect quick connector as follows:
-
Hold the sides of connector, push in tabs and pull out fuel feed tube.
A : Pull
B : Push in tabs
-
If quick connector sticks to tube of main fuel level sensor unit, push and pull quick connector several times until they start to move. Then
disconnect them by pulling.
CAUTION:
-
Quick connector (1) can be disconnected when the tabs
(F) are completely depressed. Never twist it more than necessary.