FX35 RWD V6-3.5L (VQ35HR) (2010)
Impact Sensor: Service and Repair
Crash Zone Sensor
Exploded View
CRASH ZONE SENSOR
Exploded View
Removal and Installation
CRASH ZONE SENSOR
Removal and Installation
WARNING:
-
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.
-
Never use the air tools or the electric tools for servicing.
REMOVAL
1. Remove the air duct (inlet).
-
VQ35 engine: See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Exploded View.
-
VK50 engine: See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Exploded View.
2. Remove the reservoir tank.
-
VQ35 engine: See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Exploded View.
-
VK50 engine: See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Exploded View.