FX35 RWD V6-3.5L (VQ35HR) (2010)
Telescoping Wheel Switch: Testing and Inspection
Tilt and Telescopic Switch Ground Circuit
TILT &TELESCOPIC SWITCH GROUND CIRCUIT
Diagnosis Procedure
1.CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect tilt & telescopic switch connector.
3. Check continuity between tilt & telescopic switch and ground.
Is the inspection result normal?
YES - Check intermittent incident. See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
NO - Repair or replace harness.