FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Adjustable Steering Column Switch: Service and Repair
Removal and Installation
TILT&TELESCOPIC SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the steering column mask (1). See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Installation.
2. Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).
Triangle : Pawl
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. See: Accessories and Optional
Equipment/Memory Positioning Systems/Testing and Inspection/Programming and Relearning/Additional Service When Removing Battery Negative
Terminal/Description.