FX35 RWD V6-3.5L (VQ35HR) (2010)
Ride Height Sensor: Service and Repair
Front Body Vertical G Sensor
Exploded View
FRONT BODY VERTICAL G SENSOR
Exploded View
NOTE:
The above figure shows left side. Right side is the mirror image.
Removal and Installation
FRONT BODY VERTICAL G SENSOR
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the engine room covers (LH/RH). See: Body and Frame/Access Cover/Service and Repair/Exploded View.
3. Disconnect the front body vertical G sensor connector.
4. Remove the front body vertical G sensor mounting bolts.
5. Remove the front body vertical G sensor from vehicle.
INSTALLATION
Install in the reverse order of removal.