FX35 RWD V6-3.5L (VQ35HR) (2010)
Shift Interlock: Testing and Inspection
7AT RE7R01B
Component Function Check
SHIFT LOCK SYSTEM
Component Function Check
1.CHECK A/T SHIFT LOCK OPERATION (PART 1)
1. Turn ignition switch ON.
2. Shift the selector lever to "P" position.
3. Attempt to shift the selector lever to any other position with the brake pedal released.
Can the selector lever be shifted to any other position?
YES - Go to See: Diagnosis Procedure.
NO - GO TO 2.
2.CHECK A/T SHIFT LOCK OPERATION (PART 2)
Attempt to shift the selector lever to any other position with the brake pedal depressed.
Can the selector lever be shifted to any other position?
YES - INSPECTION END
NO - Go to See: Diagnosis Procedure.
Diagnosis Procedure
SHIFT LOCK SYSTEM
Description
See: Description and Operation/7AT RE7R01B/System Description.
SHIFT LOCK SYSTEM
Diagnosis Procedure
1.CHECK POWER SOURCE (PART 1)
1. Turn ignition switch OFF.
2. Disconnect A/T shift selector connector.
3. Turn ignition switch ON.
4. Check voltage between A/T shift selector vehicle side harness connector terminal and ground.
Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 5.
2.CHECK GROUND CIRCUIT
Check continuity between A/T shift selector vehicle side harness connector terminal and ground.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace damaged parts.
3.CHECK HARNESS BETWEEN A/T SHIFT SELECTOR AND SHIFT LOCK UNIT
1. Disconnect shift lock unit connector.