FX35 RWD V6-3.5L (VQ35HR) (2010)
Propeller shaft runout measuring point (Point " ").
White arrow : Vehicle front
Standard
A : 192 mm (7.56 in)
B : 172 mm (6.77 in)
C : 172 mm (6.77 in)
REAR PROPELLER SHAFT
Inspection
APPEARANCE
Check propeller shaft for bend and damage. If damage is detected, replace propeller shaft assembly.
PROPELLER SHAFT RUNOUT
Check propeller shaft runout at measuring points with a dial indicator. If runout exceeds specifications, replace propeller shaft assembly. For
measuring point, See: Rear Propeller Shaft 3S80A-R
A : 0 - 4 degrees
JOURNAL AXIAL PLAY
As shown in the figure, while fixing yoke on one side, check axial play of joint. If it is outside the standard, replace propeller shaft assembly.
Limit
Propeller shaft runout : Refer to DLN-122, "Propeller Shaft Runout". See: Specifications/Propeller Shaft Runout
CAUTION: