FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Window Switch: Service and Repair
Rear Power Window Switch
REAR POWER WINDOW SWITCH
Removal and Installation
REMOVAL
1. Remove the rear door finisher. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Exploded
View and See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Removal and Installation.
2. Rear power window switch (1) is removed from rear power window switch finisher (2) using flat-bladed screw driver (A) etc.
CAUTION:
Never fold pawl of rear door finisher.
INSTALLATION
Install in the reverse order of removal.
NOTE:
If rear power window switch is replaced or is removed, it is necessary to perform the initialization procedure.