FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Window Switch: Service and Repair
Front Power Window Switch (Passenger Side)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Removal and Installation
REMOVAL
1. Remove the front door finisher. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Exploded
View and See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Installation.
2. Front power window switch (passenger side) (1) is removed from front power window switch finisher (2) using flat-bladed screw driver (A) etc.
CAUTION:
Never fold pawl of front door finisher.
INSTALLATION
Install in the reverse order of removal.
NOTE:
If front power window switch (passenger side) is replaced or is removed, it is necessary to perform the initialization procedure.