FX45 AWD V8-4.5L (VK45DE) (2006)
Rear Vision Camera: Description and Operation
REAR VIEW CAMERA OPERATION
When A/T selector lever is reverse position, power is supplied
-
through back-up lamp relay terminal 2
-
to TCM terminal 7.
Then back-up lamp relay is energized,
-
from back-up lamp relay terminal 5
-
to rear view camera control unit terminal 4.
Then, rear view camera control unit is sent camera ON signal
-
through rear view camera control unit terminal 8
-
to rear view camera terminal 1.
An image taken by rear view camera is sent
-
through rear view camera terminals 3 and 4
-
to rear view camera control unit terminals 10 and 9.
Then an image is sent
-
through rear view camera control unit terminals 12 and 14
-
to the display terminals 15 and 16.
An image of rear view will be projected on the display.