FX45 AWD V8-4.5L (VK45DE) (2006)
Distance Sensor: Adjustments
LASER BEAM AIMING ADJUSTMENT
Outline
Adjust the laser beam aiming every time the ICC sensor is removed or installed.
CAUTION:
-
Adjust laser beam aiming at a horizontal place as far as 12 m (39 ft) forward the vehicle can be seen.
-
Adjust laser beam aiming 5 seconds after starting engine.
-
Never view ICC sensor integrated unit body window directly during laser beam aiming adjustment.
-
Follow the CONSULT-II when adjusting the laser beam aiming (laser beam aiming adjustment cannot be operated without CONSULT-II).
-
Never ride on vehicle during laser beam aiming adjustment.
-
Idle and turn headlamps OFF during laser beam aiming adjustment.
Preparation
-
Adjust the tire pressure to the specified value.
-
See that there is no load in the vehicle.
-
Coolant, engine oil filled up to correct level and full fuel tank.
-
Shift the gear into "P" position and release the parking brake.
-
Clean the ICC sensor with a soft cloth.
Outline of Adjustment Procedure
1. Set up the ICC target board [KV99110100 (J-45718)].
2. Adjust the sensor following the procedure on CONSULT-II. (Turn manually the screw for up-down position adjustment. ICC sensor automatically
adjust the right-left position.)
Setting the ICC Target Board
Accurate ICC target board setting is required for the laser beam aiming adjustment.
CAUTION: ICC system does not function normally if laser beam aiming is not accurate.
ADJUSTING HEIGHT OF THE TARGET
1. Attach a triangle scale at the center.