FX45 AWD V8-4.5L (VK45DE) (2006)
Diagnostic Procedure (Steps 11 - 13)
Component Tests
Component Inspection
ASCD BRAKE SWITCH
1. Turn ignition switch OFF.
2. Disconnect ASCD brake switch harness connector.
3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the given conditions.
4. If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL", and perform step 3 again.
STOP LAMP SWITCH
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.
3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
4. If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.