FX45 AWD V8-4.5L (VK45DE) (2006)
b. Removal of sub fuel level sensor unit:
i.
Remove retainer.
ii. Raise and release sub fuel level sensor unit to remove.
INSTALLATION
Note to the following, and install in the reverse order of removal.
Main and Sub Fuel Level Sensor Unit
-
When installing fuel hose connector insert them fully until a click-sound of full stopper engagement is heard.
-
Face main and sub fuel level sensor units as shown in the figure,and install them with the knock pin on back aligned with pinhole on fuel tank.
-
Install retainer so that its notch becomes parallel with the notch on fuel tank.
-
Tighten retainer mounting bolts evenly.