FX45 AWD V8-4.5L (VK45DE) (2006)
Air Flow Meter/Sensor: Technical Service Bulletins
Engine Controls - Air Flow Meter Service Procedure
Classification: EC05-012A
Reference: ITB05-051A
Date: July 21, 2008
AIR FLOW METER SERVICE
This bulletin has been amended. Applied Vehicles has been updated. Please discard previous copies of this bulletin.
APPLIED VEHICLES:
2003 - 2008 G35 (V35/V36 and CV35)
2004 - 2008 FX45/FX35 (S50)
2006 - 2008 M45/M35 (Y50)
2008 G37 (CV36)
2005 - 2006 Q45 (F50)
2008 EX35 (J50)
IF YOU CONFIRM
The airflow meter needs to be replaced for any reason,
ACTION
1.
Remove the top of the air filter box with airflow meter assembly from the vehicle.
2.
Remove the airflow meter sensor from the airflow meter housing.
3.
Thoroughly clean the air filter box and the airflow meter housing.
4.
Install a new airflow meter sensor.
^
Do Not replace the entire airflow meter housing; replace only the sensor listed in the Parts information.
5.
Reinstall the top of the air filter box with airflow meter assembly back into the vehicle with a new Genuine Nissan air filter.
IMPORTANT:
The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire
Service Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIM INFORMATION
SERVICE PROCEDURE
1.
Remove the top of the air filter box with airflow meter assembly from the vehicle.
^
Refer to section EC in the appropriate Electronic Service Manual (ESM) for vehicle specific removal information.