FX45 AWD V8-4.5L (VK45DE) (2006)
b.
Lower the nut to about the middle of its travel (see Figure 26b).
c.
Lower the jack stand.
d.
Perform a, b, and c above for the right front nut.
CAUTION:
Do not completely remove the nuts.
30.
Install the jack adapter tool # J-47441-A to the differential pinion flange and suspension member as follows:
a.
Install part "A" of the adapter tool onto the pinion flange. Make sure both pins on the tool are inserted into the pinion flange bolt holes (see
Figure 27).