FX45 AWD V8-4.5L (VK45DE) (2006)
Power Trunk / Liftgate Control Module: Service and Repair
Back Door Lock & Closure Assembly
BACK DOOR LOCK ASSEMBLY
Removal and Installation of Back Door Lock & Closure Assembly
REMOVAL
1. Remove back door finisher.
2. Disconnect the connector and the clip of the back door lock & closure assembly.
3. Remove the mounting bolts.
4. Disconnect the connector of the back door opener actuator.
5. Remove the mounting bolts, remove back door lock & closure assembly.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
After installing, check operation.
-
After installing, perform fitting adjustment. Refer to BL-158, "Fitting Adjustment". See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Adjustments
Disassembly and Assembly
BACK DOOR LOCK & CLOSURE ASSEMBLY
CAUTION: Be sure to remove or install the back door closure motor with the back door lock & closure assembly.
1. Remove the back door closure motor