FX45 AWD V8-4.5L (VK45DE) (2006)
/Page-1188008.png)
8. Install bolts A, B and C in control valve with TCM.
9. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. After that tighten them in order (1 -> 2 -> 3), and then tighten other bolts to the
specified torque. Refer to AT-239, COMPONENTS.
10. Connect A/T fluid temperature sensor 2 connector.
11. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips.