FX45 AWD V8-4.5L (VK45DE) (2006)
(1).
CAUTION: For matching mark, use paint. Do not damage companion flange and drive pinion.
NOTE: The matching mark (A) on the final drive companion flange (1) indicates the maximum vertical runout position.
10. Remove drive pinion lock nut using the flange wrench.
11. Remove companion flange using a puller.
12. Remove front oil seal using the puller.
Tool number A: KV381054S0 (J-34286)
INSTALLATION
1. Apply multi-purpose grease to front oil seal lips.
2. Install front oil seal using the drift as shown in figure.
Tool number A: ST30720000 (J-25405)
CAUTION:
^
Do not reuse oil seal.
^
Do not incline oil seal when installing.