infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Transfer Case > < Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 5209
Page 5
background image

6. Install drain plug to oil pan, and then tighten drain plug to the specified torque. Refer to AT-239, "COMPONENTS".

CAUTION:  Do not reuse drain plug gasket.

7. Connect heated oxygen sensor 2 harness connector.
8. Install front cross bar. 
9. Pour ATF into A/T assembly. 

10. Connect the battery cable to the negative terminal.

Transfer Case > < Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 5209