FX50 AWD V8-5.0L (VK50VE) (2009)
Front Door Panel: Service and Repair
Removal and Installation
FRONT DOOR FINISHER
Removal and Installation
CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth before remove.
REMOVAL
1. Fully open door window.
2. Remove inside handle escutcheon (1) with a flat-bladed screwdriver (A) wrapped in a tape as shown in the figure.
3. Insert a remover tool (A) between the front door grip cap (1) and the front door grip to disengage the pawls and remove the cap.
4. Remove the bolts shown by the arrows in the figure with an appropriate tool.
5. Remove the step lamp. Refer to See: Lighting and Horns/Courtesy Lamp/Service and Repair/Step Lamp/Removal and Installation.