FX50 AWD V8-5.0L (VK50VE) (2009)
Coolant: Service and Repair
Inspection
ENGINE COOLANT
Inspection
LEVEL
-
Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.
-
Adjust the engine coolant level if necessary.
-
Check that the reservoir tank cap is tightened.
LEAKAGE
-
To check for leakage, apply pressure to the cooling system with the radiator cap tester and radiator cap tester adapter (commercial service tool)
(A).
Testing pressure : Refer to CO-49, "Radiator". See: Thermostat/Specifications/Radiator
WARNING:
Never remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from water inlet.
CAUTION:
Higher test pressure than specified may cause radiator damage.
NOTE:
In a case that engine coolant decreases, fill radiator with engine coolant.
-
If anything is found, repair or replace damaged parts.