FX50 AWD V8-5.0L (VK50VE) (2009)
Crankshaft Main Bearing Seal: Service and Repair
OIL SEAL
REAR OIL SEAL : Removal and Installation
REMOVAL
1. Remove transmission assembly. Refer to See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Overhaul/Exploded View.
2. Remove drive plate . Refer to See: Cylinder Block Assembly/Service and Repair/Exploded View.
3. Remove rear oil seal with a suitable tool.
CAUTION:
Be careful not to damage crankshaft and cylinder block.
INSTALLATION
1. Install rear oil seal.
-
Install rear oil seal so that each seal lip is oriented as shown in the figure.