FX50 AWD V8-5.0L (VK50VE) (2009)
Hose/Line HVAC: Service and Repair
High-Pressure Flexible Hose
COOLER PIPE AND HOSE
HIGH-PRESSURE FLEXIBLE HOSE HIGH-PRESSURE FLEXIBLE HOSE : Removal and Installation
REMOVAL
1. Remove hoodledge cover LH. Refer to See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Exploded View.
2. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
3. Remove air cleaner case (bank 1). Refer to See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Exploded View.
4. Remove mounting bolt (A) from high-pressure flexible hose bracket (1).
5. Disconnect one-touch joint between high-pressure flexible hose
(2) and condenser pipe assembly (3) with disconnector (B)
(SST: 9253089912).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
6. Remove mounting nut (A), and remove low-pressure flexible hose (1) a position without the hindrance for work.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with suitable material such as vinyl tape to avoid the entry of air.
7. Remove mounting nut (A), and then remove high-pressure flexible hose (1).
CAUTION: