FX50 AWD V8-5.0L (VK50VE) (2009)
Trunk Lamp: Service and Repair
Back Door Side
Exploded View
LUGGAGE ROOM LAMP
BACK DOOR SIDE : Exploded View
Removal and Installation
LUGGAGE ROOM LAMP
BACK DOOR SIDE : Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1. Insert any appropriate tool into the gap between the luggage room lamp (back door side) assembly and back door finisher inner. Remove the
luggage room lamp (back door side) assembly.
2. Disconnect the luggage room lamp (back door side) connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
LUGGAGE ROOM LAMP
BACK DOOR SIDE : Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after it turns OFF.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp. When
replacing bulb, always replace it with new one.
LUGGAGE ROOM LAMP BULB
1. Remove the luggage room lamp (back door side). Refer to See: Exploded View.
2. Remove the screw. And then remove the lens.
3. Remove the bulb.