FX50 AWD V8-5.0L (VK50VE) (2009)
Collision Avoidance Module: Service and Repair
ICC Sensor Integrated Unit
Exploded View
ICC SENSOR INTEGRATED UNIT
Exploded View
CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal and installation of ICC sensor
integrated unit.
Removal and Installation
ICC SENSOR INTEGRATED UNIT
Removal and Installation
REMOVAL
1. Remove front bumper fascia. Refer to See: Body and Frame/Bumper/Front Bumper/Service and Repair/Exploded View.
2. Remove air guide lower (LH). Refer to See: Body and Frame/Radiator Support/Service and Repair/Exploded View.
3. Disconnect ICC sensor integrated unit connector.
4. Remove mounting bolts from ICC sensor integrated unit.
5. Remove ICC sensor integrated unit.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor
integrated unit.
Refer to See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control Unit (ICC Sensor Integrated
Unit)/Description/DCA See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control Unit (ICC Sensor
Integrated Unit)/Special Repair Requirement/DCA See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing
Control Unit (Accelerator Pedal Assembly)/Description See: Cruise Control/Service and Repair/Procedures/Additional Service When
Replacing Control Unit (Accelerator Pedal Assembly)/Special Repair Requirement, "ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT (ICC SENSOR INTEGRATED UNIT) : Description".