FX50 AWD V8-5.0L (VK50VE) (2009)
Headlamp Alignment Control Module: Service and Repair
Removal and Installation
AFS CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the instrument driver lower panel. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
2. Remove the AFS control unit mounting bolt.
3. Disconnect the AFS control unit connector.
4. Remove the AFS control unit.
INSTALLATION
Install in the reverse order of removal.