FX50 AWD V8-5.0L (VK50VE) (2009)
Impact Sensor: Service and Repair
Crash Zone Sensor
Exploded View
CRASH ZONE SENSOR
Exploded View
Removal and Installation
CRASH ZONE SENSOR
Removal and Installation
WARNING:
-
Before servicing, turn ignition switch OFF, disconnect the battery negative terminal and wait at least
3 minutes.
-
Never use the air tools or the electric tools for servicing.
REMOVAL
1. Remove the air duct (inlet).
-
VQ35 engine: Refer to See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner
Fresh Air Duct/Hose/Service and Repair/Exploded View.
-
VK50 engine: Refer to See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner
Fresh Air Duct/Hose/Service and Repair/Exploded View.
2. Remove the reservoir tank.
-
VQ35 engine: Refer to See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Exploded View
.
-
VK50 engine: Refer to See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Exploded View
.